Basic Information About Dust Filtration Filtration plays an important role in most aspects of day-to-day life, with increasing emphasis on the control of pollution, and the awareness of the need for clean air.
Filters for industrial filtration are designed for removing the contaminant dust for the various industrial applications. The dust is occurring during the production process of grinding, brushing, drying, burning…
Filter media is the most important member of dust collector plant. Without any doubt it is the most important part of the installation, because it alone fulfils the purpose for which the plant has been built: to separate the solid matter from gas and to reduce the concentration of dust on a low regulation level. When selecting the best filter media or device for your application, consider the important properties described below :
Dust level reach even up to several 100 g/m2
Efficiency of filter media is more than 99,9 %
Filtration occurs on a surface of filter media
Filters required periodic cleaning during the process,
As the layer of dust increases the filter resistance rises
Typical face velocity lie between 0.5-5 cm/s or between 18-180 m/h
Discharge concentration can be reliably kept bellow 5 mg/m3
The industrial or dust filtration mean the separation of system solid-gas. This field covers a various range of applications.
Types of Filter Media and Fibre Types The selection of appropriate filter media decides the quality and economy of an entire filtration process. In order to obtain a good operation and long lifetime of filter media is the most important to know ...
Special Treatments of Filters The following phisycal operations are available for better performance of filter media ...
Construction of Filter Sleeves KonusKones has in a field of ready made filter bag/ sleeves/pockets more than 30 years of experiences. The filter media is selected after thorough understanding of the filtration process and desired results ...
